Quick Answer
How to budget: SWB adjustable bars cost $85 per module; each module is 16 inches wide with 4 inches between modules. A 36-inch window takes 2 modules ($170) and a 48-inch window takes 3 ($255). For six 36-inch windows, budget $1,020 plus shipping for DIY. Retail fixed-size bars and custom fabrication vary widely — get current prices or local quotes and compare sizing and egress specs.
Many homeowners pay for custom fabrication they may not need — hiring a local fabricator for a custom job when an adjustable system could cover the same standard window. Before you accept a custom quote, compare it with an adjustable system: SWB costs $85 per module, so a 48-inch window takes 3 modules — $255 plus shipping.
The gap isn't about quality — it's about the business model. Custom fabricators charge for design, metalwork, travel, and installation labor. SWB skips custom design and metalwork by shipping an adjustable system direct to your door, and you can install it yourself.
Here's a number worth keeping in mind: the FBI put the average dollar loss per burglary at $2,661 (Crime in the United States, 2019). A 48-inch window with SWB bars costs $255 plus shipping.
Written by the SWB team. Code references are cited so you can check them; your local building department has the final word.
Why Window Bar Prices Vary So Widely
Walk into a hardware store and you'll find low-cost fixed bars. Call a local ironworker and a custom quote can be many times higher. Both are “window bars,” but they are fundamentally different products serving different needs — and neither price is wrong, given the product.
A fixed-size bar comes in set widths. If your window doesn't match, it may not fit without modification. If it has no release mechanism, it shouldn't go on a bedroom escape window — codes require bars there to open from inside without keys or tools. Check the finish, too, if you live in a humid climate.
A custom bar is fabricated to your exact window size, finished, installed by a professional, and often comes with a warranty on labor. For commercial properties or homes where custom design is needed, that price can be justified.
For many homeowners, neither extreme is the right answer. An adjustable, galvanized system like SWB sits in the practical middle — $85 per module, installed in 15–30 minutes per window without a contractor, with a quick-release model (A/EXIT) for bedroom escape windows. It's a category many homeowners don't know exists until they do research.
When to Hire a Pro vs. DIY
The decision isn't about skill — it's about wall type and time. SWB bars are engineered for DIY installation by homeowners with no prior security installation experience. All hardware comes in the box, and the installation guide walks through every step: mark, drill four points, and fasten with security screws.
The exceptions are masonry walls in older homes where the anchor substrate is unpredictable, or buildings with historic preservation requirements where any drilling must be done by a licensed contractor to preserve facade compliance. In both cases, you can still buy SWB bars direct and pay a professional only for the labor.
One scenario to avoid: hiring a contractor who sources their own bars and marks them up before adding labor. Always purchase bars direct and hire labor separately. A markup on “included materials” in a contractor quote can add noticeably to the project cost. See our installation guide for the full DIY walkthrough.




