Quick answer
Renters have three real options for window bars: (1) no-drill tension bars: usually no holes, but lower security (check your lease); (2) landlord permission + SWB Model A frame-mount: 4 drilled points per bar, patchable on move-out; (3) negotiate: offer to pay and restore on move-out. Ground-floor renters should prioritize this, since those windows are the easiest to reach.
Can renters install window security bars?
Renter risk
Many renters assume they can't install protective hardware without risking their deposit. That assumption leaves ground-floor and accessible apartment windows as soft targets. You have more options than you think.
The short answer is: it depends on your lease. Most residential leases have a clause prohibiting permanent modifications without written landlord consent. Window bars that require drilling fall into this category.
However, this doesn't mean you have no options. Three approaches work for renters:
No-drill tension bars
Get landlord permission
Landlords are more likely to approve SWB bars if you explain:
- The bars add security to the property
- Each bar mounts at 4 drilled points that can be filled on move-out
- You'll pay for any restoration required
Pro tip: get permission in writing. Frame it as a property improvement, not a personal modification.
Frame-mount only (no wall holes)
Ground-floor apartment security
Ground-floor windows are the easiest for a burglar to reach. Window bars on those windows add a physical barrier that makes entry much harder.
If your landlord won't approve bars, escalate by:
- Referencing local burglary statistics for your neighborhood
- Offering to share the cost with the landlord
- Pointing out that the bars add security to their property
- Checking your local tenant rights and housing rules
NYC-specific requirements
NYC law
About this guide: general information, not legal advice. Code references name the model code section (IBC, IRC) so you can look it up yourself. Codes are adopted and amended locally; final requirements are set by your local authority having jurisdiction (AHJ).
Apartment window bar FAQ
Can renters install window security bars without landlord permission?
It depends on your lease. Most leases prohibit permanent modifications without approval. However, no-drill tension bars require no holes and are generally acceptable. SWB bars require drilling, so request written permission from your landlord — offering to restore the property on move-out can help.
Can landlords refuse to install window security bars?
Generally, landlords are not required to provide window bars unless a local ordinance says so. Some cities have specific rules — for example, New York City requires landlords to install approved fall-prevention window guards where a child 10 or younger lives (those are window guards, not security bars). Check your local housing code.
What is the most secure option for renters who can't drill?
No-drill tension bars provide deterrence but low physical security. A better renter option is to ask your landlord for permission to install bolted bars like SWB, offering to fill the 4 mounting holes per bar on move-out.
Do window bars affect apartment fire safety?
Bars over an emergency escape window — typically in a bedroom — must release from inside without keys or tools (IRC R310.4.4 / IBC § 1031.6). Use a quick-release model like SWB Model A/EXIT, which is designed to meet those requirements, and confirm with your building manager or local AHJ. Never block a required escape route.
Questions about your windows?
Send the width and height of each window and the wall type, and we'll reply by email.
