Guide
Window Guards vs. Window Security Bars
Understanding the difference — a window guard is for child fall prevention, a security bar is for intrusion. SWB makes security bars.
Updated: November 2026 · Security Window Bars
Young children can fall from windows in seconds, and a window screen will not stop them. New York City responded in the 1970s with its Children Can't Fly program and a requirement for approved window guards in apartments where young children live — the NYC Health Department credits the program with a sharp drop in child window falls. Most of the country has no such mandate, so the choice is left to parents.
The confusion between “window guards” and “window security bars” is a real problem — parents sometimes buy a security bar thinking it will protect their child from falls, not realizing the products have different engineering requirements. This guide clarifies both — and is upfront that SWB bars are security bars, not child window guards.
The terms “window guard” and “window security bar” look interchangeable in a Google search. They're not. One is engineered to resist outward pressure from a child's body weight. The other resists inward force from a forced entry attempt. If you need both, use a product made and tested for each job.
Quick Answer
Window guards vs. window security bars: Window guards are designed to prevent children from falling out of windows — they resist outward/inside-out pressure and require adult-operable quick-release. Security bars are designed to slow down unauthorized entry — they resist exterior force and, on bedroom escape windows, must release from inside (IRC R310.4.4 / IBC § 1031.6). The products look similar but serve different primary functions. SWB bars are security bars, not certified window guards, and should not be relied on to prevent child falls. On bedroom windows, SWB Model A/EXIT adds an inside quick release (designed to meet IRC R310.4.4 / IBC § 1031.6 — verify with your local building department).
We make window security bars. This guide is general information, not legal advice — confirm local rules with your health or building department.
What the Law Actually Requires
Window guard requirements vary dramatically by jurisdiction. New York City has one of the best-known rules: under NYC Health Code §131.15, landlords of multiple dwellings must install window guards in apartments where a child 10 or younger lives, or when a tenant asks. Only guards approved by the NYC Department of Health and Mental Hygiene qualify, and windows to fire escapes are exempt. SWB bars are not NYC-approved window guards.
Outside NYC, most states and municipalities have no window guard mandate. The model building codes (IRC/IBC) address egress for security bars and set minimum sill heights or window opening control devices for some new construction, but they don't require guards in existing homes. For fall prevention, look for guards or window opening control devices tested to ASTM F2090.
For homeowners (rather than landlords), the decision is usually voluntary — so match the product to the job. A child safety guard is not engineered to stop a forced entry. A security bar is not tested to stop a child from falling, and one without an inside quick release could trap a child in a room during a fire. If you need both protections, plan for both products.
See our full burglar bars guide for security-specific product selection, and our installation guide for egress considerations during install.
The Key Difference
Same Look, Different Purpose
Window Guards
Primarily designed to prevent children from falling out of windows. Tested to withstand pressure from the inside (a child leaning or pushing against them), typically to ASTM F2090 or a local approval; models for escape windows include an adult-operable release.
Window Security Bars
Designed to slow down unauthorized entry from outside. Built to resist exterior force; bars on bedroom escape windows must release from inside so occupants can get out.
The products look similar, but the engineering priorities are different. In common usage, the terms are often used interchangeably — which creates confusion.
When You Need Each
Choose the Right Product
Window Guards
Child Safety- →Children under 10 in household
- →Upper-floor windows (2nd+ floor)
- →NYC mandatory requirements
- →Child fall prevention primary concern
Security Bars
Burglary Prevention- →Ground floor burglary prevention
- →Any floor security concern
- →Accessible windows
- →Bedrooms: a model with inside quick release (e.g., A/EXIT)
Feature Comparison
Where SWB Fits
What SWB Bars Are — and Aren't
SWB bars are built for one job: making windows harder to get through from outside. On bedroom windows, Model A/EXIT adds an inside quick release — lift the end tube and the module swings open like a door, no keys or tools — and is designed to meet IRC R310.4.4 / IBC § 1031.6 (verify with your local building department). Models A and B have no quick release and belong on non-sleeping rooms.
Important: SWB bars are security products, not child safety window guards. They are not tested to ASTM F2090, are not NYC-approved, and should not be relied on to prevent falls. If you need fall prevention, use a certified window guard or window opening control device.