Renters Guide
Window Security Bars for Apartments
What renters need to know before buying window bars — lease considerations, no-drill options, and landlord negotiations.
Updated: May 2026 · Security Window Bars
Quick Answer
Renters have three real options for window bars: (1) no-drill tension bars — usually no holes, but lower security (check your lease); (2) landlord permission + SWB Model A frame-mount — 4 drilled points per bar, patchable on move-out; (3) negotiate: offer to pay and restore on move-out. Ground-floor renters should prioritize this — those windows are the easiest to reach.
Can Renters Install Window Security Bars?
Renter Risk
A break-in can cost you belongings, time and peace of mind — and insurance may not cover everything. Compare that with the cost of patching a few small mounting holes on move-out.
Many renters assume they can't install protective hardware without risking their deposit. That assumption leaves ground-floor and accessible apartment windows as soft targets. You have more options than you think.
The short answer is: it depends on your lease. Most residential leases have a clause prohibiting permanent modifications without written landlord consent. Window bars that require drilling fall into this category.
However, this doesn't mean you have no options. Three approaches work for renters:
Option 01
No-Drill Tension Bars
Spring-tension bars wedge inside the window opening without any drilling. They usually leave no holes, so many leases allow them — check yours. The tradeoff: because they are held by pressure, not bolts, they resist much less force than bolted bars. Useful mainly as a deterrent.
Option 02
Get Landlord Permission
Landlords are more likely to approve SWB bars if you explain:
The bars add security to the property
Each bar mounts at 4 drilled points that can be filled on move-out
You'll pay for any restoration required
PRO TIP
Get permission in writing. Frame it as a property improvement, not a personal modification.
Option 03
Frame-Mount Only (No Wall Holes)
SWB Model A can be mounted directly to the window frame without touching the walls. Frame mounting uses the existing window frame as the anchor — 4 drilled points with the security screws included. It still drills into the frame, so it needs your landlord's approval. Verify with your landlord.
Ground-Floor Apartment Security
Ground-floor windows are the easiest for a burglar to reach. Window bars on those windows add a physical barrier that makes entry much harder.
If your landlord won't approve bars, escalate by:
Referencing local burglary statistics for your neighborhood
Offering to share the cost with the landlord
Pointing out that the bars add security to their property
Checking your local tenant rights and housing rules
NYC-Specific Requirements
NYC LAW
New York City requires landlords to install approved window guards — fall-prevention devices — in apartments where a child 10 or younger lives (NYC Health Code, Article 131). Those are certified window guards, not security bars: SWB bars are not fall-prevention devices and do not satisfy that law. Ask your landlord about window guards, and check NYC rules before adding any bars.
