Ships to all 50 states(650) 437-1575
SWB Security Window Bars
How-To & Scenarios

Interior Window Safety Bars: What They Do and Don't Protect

Interior window safety bars add security from inside, but they are not child guards. Learn which rooms, exits and fire rules decide your choice.

By Security Window Bars · Updated · 9 min read

Interior Window Safety Bars: What They Do and Don't Protect
Security Window Bars

Interior window safety bars add security from inside, but they are not child guards. Learn which rooms, exits and fire rules decide your choice.

What are interior window safety bars and what do they actually do?

The NFPA warns that some security bars "can trap you in a fire" and can also keep firefighters from reaching you. Keep that warning in mind when you shop for interior window safety bars, because the phrase covers very different products. Some are simple fixed grids. Others have a release you can operate from inside. Read the NFPA Security Bar Safety sheet before you compare anything else.

Interior window safety bars are bars or grills mounted on the room side of a window opening. You will see them sold as window safety bars, safety grills or a window safety grill. The names vary by seller. The job is the same: put a rigid barrier across the opening so someone cannot easily reach in or climb through.

Mounting them inside has a practical effect. The hardware sits on the side where you stand, so any release device is within your reach. It also means the bars are part of your fire plan, not just your security plan. A bar that stops an intruder can also stop you if it cannot be opened quickly from the inside.

These products are security tools. They deter break-ins and let some people keep a window open for air with a physical barrier in place. They do not replace smoke alarms, a second way out of the room, or a guard made for preventing falls. Section 2 explains that last limit.

One note on terms: a safety door bar is a different product for a different opening. The same exit principle applies, since you must always be able to get out, but this post covers windows only. For how local fire rules treat barred windows, see our page on window bars and fire code.

Row of brick townhouses with ground-floor windows on a quiet street in Baltimore, Maryland
Illustrative image created with AI.

Are interior window safety bars the same as child or pet window guards?

No. This is the most important limit in this post. Security bars and fall-prevention devices solve different problems, and mixing them up can hurt someone.

SWB bars are security bars. They are not child fall-prevention devices. The 5.25-inch bar spacing on SWB's Model A does not contain small children or pets, and you should not count on any security bar for that purpose. If a toddler or a small animal shares your home, treat the bars as irrelevant to fall safety.

The NFPA sheet names what can work for falls: a window guard or gate, or a window stop or wedge, can keep a child from falling out of an open window. Those are products made and sold for that job. Look for them separately, and follow the maker's instructions.

There is a second catch. Any guard or bar on a bedroom or basement escape window still has to let adults out in an emergency. NFPA says all exits, including barred windows, must open easily from inside. If you want fall protection on a window that is also your escape route, ask your local fire department or building official what is acceptable before you buy.

Pets raise the same question in a smaller way. A fixed grid with gaps is not a pet barrier. A screen is not a barrier either. If an open window is a risk for an animal in your home, keep it closed or limit how far it opens, using a stop made for that purpose.

Adult man seated in an armchair beside a half-open double-hung window in a Chicago brick two-flat living room
Illustrative image created with AI.

Which rooms can use interior window safety bars, and which cannot?

It depends on whether the window is an emergency escape and rescue opening. Under the 2021 IRC, section R310.1, basements, habitable attics and every sleeping room need at least one operable escape opening, with limited exceptions such as a basement used only for mechanical equipment. Local code may differ from the 2021 IRC, so confirm with your building department.

Window situationWhat the code asksSWB fit
Bedroom windowOperable escape opening; bars must release from inside without a key, tool or extra forceOnly a bar with a built-in quick-release. SWB describes Model A/EXIT that way; the building official decides compliance.
Basement window that is the required escape openingSame release rule, plus an area well if the opening is below gradeSame as above. Do not use Model A or Model B here.
Basement used only for mechanical equipment, or a window the official confirms is not an escape openingEscape rules may not apply to that windowModel A or Model B may fit. Get the confirmation first.
Bathroom, laundry, pantry or other non-sleeping roomR310.1 does not list these room types, but confirm locallyModel A (frame or wall mount) or Model B (masonry, stucco, irregular frames)
Window you want to guard against fallsNot a security-bar jobUse a window guard, gate, stop or wedge. SWB bars are not fall protection.

SWB lists its Model B as not rated for fire code or egress, so it belongs only on windows that are not escape openings. Model A has no integrated quick-release, so the same caution applies. Neither one is a fit for a bedroom or basement escape window.

For windows that do serve as escape openings, Model A/EXIT is the one SWB describes as its egress-compliant model, with a hand-operated lift-bolt quick-release from inside. SWB describes it that way. The building official decides whether the installed window complies. If your basement window sits in a well, read our page on basement window bars too.

If you are unsure whether a window counts as an escape opening, assume it does until the official tells you otherwise.

Finished basement room in a Denver home with a small high window set into a window well
Illustrative image created with AI.

What do fire-safety rules say about interior window safety bars?

Two sources matter most: the 2021 IRC for the building side, and NFPA for the household side. The Boulder County escape opening guide summarizes the code, and the full code body is published by ICC. Section numbers change between editions, so always say "2021 IRC" and check what your city has adopted.

Here is what the 2021 IRC says about escape openings:

  • R310.1: basements, habitable attics and every sleeping room need at least one operable escape and rescue opening, with limited exceptions.
  • R310.1.1: the opening must be operable from inside "without the use of keys, tools or special knowledge".
  • R310.2.1: net clear opening of at least 5.7 sq ft, or 5 sq ft at grade floor.
  • R310.2.2: net clear height of at least 24 in and net clear width of at least 20 in.
  • R310.2.3: the bottom of the opening at most 44 in above the floor.
  • R310.4: an area well when the opening is below grade (at least 9 sq ft and 36 in), with a permanent ladder or steps if deeper than 44 in.
  • R310.4.4: bars, grilles, covers and screens over escape openings must leave the required net clear opening and be "releasable or removable from the inside without the use of a key or tool or force greater than that required for the normal operation of the escape and rescue opening".

That last item is the one that governs bars. A bar that needs a key, a padlock or a tool to open does not fit a bedroom or basement escape window. Never add one to such a window, even as a "temporary" fix.

On the household side, NFPA gives practical steps. Find at least two ways out of every room. Make sure every exit, including barred windows, opens easily from inside. Choose bars with quick-release devices. Run a home fire drill twice a year. Practice the release with everyone who may need it.

Bars are only one layer. The NFPA Smoke Alarms at Home sheet says to put alarms in every bedroom, outside each sleeping area and on every level, including the basement. Test them monthly and replace them at 10 years.

Hallway ceiling smoke alarm in a Philadelphia rowhouse with a bedroom doorway and window beyond
Illustrative image created with AI.

How do you choose and install interior window safety bars step by step?

Start with the purpose, then match the product. Follow these steps in order:

  1. Decide the goal. If it is break-in deterrence, security bars fit. If it is fall protection, they do not.
  2. Find out whether the window is an escape opening. Ask your building department, and count bedrooms, basements and habitable attics as escape openings until told otherwise.
  3. Check the size. Model A telescopes from 35 to 65 inches high and is modular at 16 inches of width per module. Model B covers 35 to 61 inches of height. Model A/EXIT has a 43-inch base width, expandable with modules.
  4. Check the wall. Model A mounts to the frame or the wall. Model B is wall-mount, built for masonry, stucco and irregular frames.
  5. Check the budget. Model A and Model B are $85 per core module. Wider windows need more modules. Model A/EXIT is quote only, through the quote form.
  6. Install carefully. Model A takes 15 to 30 minutes, but the manual drills pilot holes and uses the included anchors, so it is not a no-drilling job.
  7. Test the release if your bar has one, and make sure everyone who may need to leave through that window knows how it works.

For the full price picture, including modules for wide windows, read our window bars cost guide. For mounting steps and common mistakes, see our window bars installation guide.

Model A carries a 1-year limited warranty. It suits windows that are not escape openings, such as a bathroom or a storage room. Galvanized steel with electrostatic paint is how SWB describes the finish.

One more limit: a bar is only as sound as the surface it is anchored to. If the frame or wall is damaged or crumbling, fix that first, or pick the mount type that fits your wall.

Sunlit kitchen window in a Brooklyn apartment building with a view of neighboring brick buildings
Illustrative image created with AI.

Frequently Asked Questions

Are interior window safety bars safe in a fire?

It depends on the release. NFPA warns that some security bars can trap you in a fire, so any bar over a bedroom or basement escape window must open from inside without a key or tool.

Do interior window safety bars stop a child from falling out of a window?

No. SWB bars are security bars, and the 5.25-inch spacing does not contain small children or pets. NFPA names window guards, gates, stops and wedges for fall prevention.

Can I put Model A or Model B on a bedroom window?

No, not on an escape opening. Model A has no integrated quick-release, and SWB lists Model B as not rated for fire code or egress. Ask the building official about your window.

Which SWB model has a quick-release?

Model A/EXIT. SWB describes it as its egress-compliant model with a hand-operated lift-bolt quick-release from inside. The building official decides compliance of the installed window.

How much do interior window safety bars cost?

Model A and Model B are $85 per core module, and wider windows need more modules. Model A/EXIT is quote only.

Sources (facts checked 2026-11-12)

Code numbers refer to the 2021 International Residential Code; your city or state may have adopted a different edition. Confirm with your local building department or fire marshal.

Interior window safety bars can add real security, but only when you match them to the right window. Keep security bars off any escape opening unless they release from inside without keys or tools. Use a fall guard, not a security bar, for falls. If you want to compare options, browse the Model A page or request a quote for Model A/EXIT. Take your time, check your local code, and let the building official confirm what applies to your home.

The SWB models

Keep reading

Security Window Bars. Product facts come from SWB's published specifications. Your local building department has the final word on bedroom windows.

Questions about your windows?

Send the width and height of each window and the wall type, and we'll reply by email.

We reply by email.

Find your bar →