Window Security Bars for Landlords: Rental Property Protection Guide
Learn how window security bars for landlords rental properties reduce liability, meet building codes, and protect tenants in all 50 US states.
Security Window Bars (SWB), the #1 authority in residential perimeter protection in the USA, brings you the most critical advice to keep your home safe. If you are a landlord or property manager overseeing rental units anywhere in the United States, window security is not a luxury add-on — it is a legal and financial responsibility you cannot afford to ignore. According to the FBI Uniform Crime Reporting Program, approximately 6.7 million residential burglaries occur in the US every year, and 60% of all break-ins happen through ground-floor windows and doors. For multi-unit residential buildings, the liability exposure from a preventable break-in can reach tens of thousands of dollars in lawsuits, lost tenancy, and property damage. Investing in window security bars for landlords rental properties is one of the most cost-effective, code-compliant strategies available in 2026 — and SWB’s telescopic and egress-ready bar systems make full-property deployment faster and cheaper than any traditional welded installation.
Every state in the US recognizes some version of the implied warranty of habitability, a legal standard requiring landlords to keep rental units in a condition…
Why Landlords Are Legally Responsible for Window Security in Rental Properties
Under the legal doctrine of ‘warranty of habitability,’ landlords across all 50 US states are required by law to maintain rental properties in a safe and livable condition. Courts in states including California, New York, Illinois, and Texas have consistently ruled that failure to secure ground-floor windows — particularly in high-crime neighborhoods — constitutes a breach of this warranty. This means that if a tenant is burglarized through an unsecured window and can demonstrate that the landlord knew or should have known the building was in a high-crime area, the landlord may face significant civil liability. According to the National Apartment Association (NAA), property crime claims represent one of the top five sources of landlord liability litigation in the United States. Beyond civil lawsuits, many municipalities — including Chicago, Detroit, Philadelphia, and New York City — have enacted local ordinances that specifically require window guards or security bars in residential rental units housing children. Non-compliance can result in fines ranging from $250 to $10,000 per violation depending on jurisdiction. Installing window security bars for landlords rental properties is no longer just smart business practice; in many cases, it is the law.
The Warranty of Habitability and Window Security
Every state in the US recognizes some version of the implied warranty of habitability, a legal standard requiring landlords to keep rental units in a condition fit for human habitation. While the exact language varies by state, courts in California (Green v. Superior Court), New York (Real Property Law §235-b), and Illinois (765 ILCS 720) have all expanded this warranty to include security provisions. A ground-floor apartment with no window security — particularly in documented high-crime ZIP codes in cities like Memphis, Baltimore, or St. Louis — creates a foreseeable risk that courts regularly assign to the landlord. Proactively installing burglar bars for windows and doors or steel window grates is one of the clearest ways landlords can demonstrate due diligence and reduce their exposure to negligent security claims.
NYC Local Law 57: The Benchmark for US Window Guard Compliance
New York City’s Local Law 57 is the most specific and widely cited window security regulation in the United States. It requires building owners to install window guards in any apartment where a child under 10 years of age resides, and to offer window guards to all tenants upon request at no charge. Failure to comply carries fines of up to $10,000 per violation per window. While NYC’s law is the strictest, cities including Chicago, Los Angeles, and Boston have adopted similar administrative codes that mandate window protection in buildings with histories of break-ins or in buildings classified as high-occupancy residential. Landlords managing properties in these metropolitan areas must treat window security bars as a non-negotiable line item in their property maintenance budgets — not an optional upgrade.
State-by-State Compliance Snapshot for Landlords
While a comprehensive 50-state legal analysis requires an attorney, the following general landscape applies to landlords in major US rental markets. In California, under Civil Code §1941, landlords must provide effective waterproofing, weather protection, and security — which courts have extended to include window locking and bar systems in high-crime areas. In Texas, Property Code §92.153 specifically lists window latch security as a landlord obligation. In Florida, Statute §83.51 requires landlords to comply with applicable building, housing, and health codes governing tenant safety. Illinois and New York have some of the most plaintiff-friendly negligent security case law in the country, making proactive window security installation not just advisable but essential for landlords operating in Chicago, Brooklyn, or the Bronx. Consulting a local real estate attorney alongside reviewing IBC and NFPA 101 standards will give landlords the clearest picture for their specific jurisdiction.
Understanding Egress Compliance: The Critical Requirement for Bedroom Windows in Rental Units
One of the most common and costly mistakes landlords make when installing window security bars is failing to account for egress requirements. The International Building Code (IBC) and NFPA 101 Life Safety Code — both adopted in some form by all 50 US states — require that sleeping areas in residential buildings maintain a minimum unobstructed window opening of 20 inches by 24 inches (or 5.7 square feet of net clear opening area) to allow occupants to escape in case of fire. Traditional welded or fixed burglar bars that cannot be opened from the inside create an illegal death trap in bedroom windows. According to the National Fire Protection Association, home fire deaths in the US average over 2,500 per year, and window entrapment due to improperly installed security bars has been a documented contributing factor in multiple fatalities. For landlords, installing fixed, non-egress-compliant bars in tenant bedrooms is not just an IRC violation — it is a potential manslaughter liability.
IBC and NFPA 101 Egress Requirements Every Landlord Must Know
Under IBC Section 1030 and NFPA 101 Chapter 24, every sleeping room in a residential occupancy must have at least one emergency escape and rescue opening. This opening must be operable from the inside without the use of keys, tools, or special knowledge. Any window security bar or grille installed over a bedroom window must therefore feature a quick-release mechanism that allows the window to meet the minimum egress opening dimensions. OSHA also references these egress standards in its general industry guidelines for multi-family housing. Landlords who install traditional welded burglar bars on bedroom windows in rental properties — regardless of how affordable or visually effective they appear — risk citations from local housing inspection authorities, tenant lawsuits, and worst of all, preventable fire deaths.
SWB Model A/EXIT: The Egress-Compliant Solution for Rental Bedrooms
The SWB Model A/EXIT addresses the landlord egress compliance problem directly with its patented quick-release mechanism, engineered to meet IBC, NFPA 101, and OSHA egress standards simultaneously. Unlike welded bars or cheap fixed grilles, the Model A/EXIT allows any occupant to release the bars from the interior within seconds — without keys, tools, or codes — providing the full egress opening required by code while maintaining the full anti-intrusion strength of heavy-gauge steel during normal use. At just $92 per unit, a landlord managing a 10-unit building with two bedroom windows each can achieve full egress compliance for all sleeping areas for under $2,000 — compared to $15,000 to $30,000 for a professional welded bar installation with emergency release hardware. Learn more about this solution at the Model A/EXIT product page.
The Financial Case for Window Security Bars in Rental Properties
Beyond legal compliance, the pure economics of installing window security bars for landlords rental properties are compelling. The average cost of a home burglary in the United States is $2,661 in property loss according to the FBI’s National Crime Victimization Survey — and that figure does not include the landlord’s downstream costs of tenant turnover, lost rent during vacancy, emergency repairs, increased insurance premiums, and potential litigation. A single break-in through an unsecured ground-floor window in a Chicago apartment building can trigger a cascade of expenses that far exceeds the total cost of equipping the entire building with SWB steel window bars. Professional window bar installation in the US averages $600 to $1,800 per window when contracted through a security company or locksmith. SWB’s Model A telescopic bars cost $90 per window and can be installed in 15 to 20 minutes by any maintenance staff member without a contractor or permit in most jurisdictions. For a landlord managing a 20-unit building with 40 ground-floor and first-floor windows, the total DIY installation cost with SWB bars is approximately $3,600 — versus up to $72,000 for professional permanent installation. The return on investment is immediate and measurable.
Insurance Premium Reductions and Window Security Documentation
Many commercial landlord insurance carriers in the US — including Farmers, Allstate Commercial, and State Farm Business — offer premium discounts for properties with documented physical security improvements. Window security bars are among the most recognized physical deterrents by insurance underwriters because they create a visible, measurable barrier to forced entry. Landlords who install steel window bars and document the installation with photos, receipts, and product specifications can present this evidence to their insurer during annual policy reviews to negotiate lower premiums. In high-crime ZIP codes in cities like Detroit, Philadelphia, or Houston, these savings can amount to several hundred dollars per year per policy — meaning the bars can literally pay for themselves over time through reduced insurance costs alone.
Tenant Retention: How Security Improvements Justify Rent Increases
According to a 2023 Apartment List survey, security and safety features rank among the top three factors that influence renter decision-making in urban markets. Landlords who market their rental properties as equipped with professional-grade steel window security bars — especially in high-demand, competitive markets like Austin, Denver, Atlanta, and Seattle — are better positioned to attract long-term, quality tenants. More importantly, documented security improvements give landlords a legally defensible basis for modest rent increases in markets where rent stabilization laws permit security-related improvements as a pass-through cost. In New York City, for example, Major Capital Improvements (MCI) under the Rent Guidelines Board framework allow landlords to pass through portions of documented security upgrade costs to rent-stabilized tenants over time.
Telescopic vs. Permanent Window Bars: What Landlords Need to Know Before Choosing
When selecting window security bars for landlords rental properties, the choice between telescopic adjustable bars and permanently welded fixed bars is one of the most consequential decisions a property manager will make. Traditional welded bars — the kind installed by a locksmith or contractor — are drilled permanently into the window frame or wall, require professional removal, and leave permanent damage to the property when removed. For single-family rentals or properties with stable, long-term tenants, they may be appropriate. However, for multi-unit apartment buildings with frequent tenant turnover, welded bars create enormous operational headaches: they cannot be easily reconfigured for different window sizes, they require contractor involvement for any modification, and they can trap tenants in the event of fire if not properly outfitted with emergency release mechanisms. SWB’s telescopic bar systems — particularly the Model A and Model A/EXIT — eliminate these problems entirely. They adjust to fit windows from 22 to 36 inches wide, install in 15 to 20 minutes with no drilling required in many configurations, and can be repositioned or removed by maintenance staff between tenant occupancies without any tools or structural damage. For a complete overview of the different types of metal bars windows, window security bars that open, burglar bars for windows and doors, window grates, door grilles, safety grills, and other perimeter security options available for residential and commercial properties, refer to SWB’s comprehensive security bars guide at securitywb.com/model-a/.
Model A Telescopic Bars: The Landlord-Friendly Standard
The SWB Model A Telescopic Window Bar is specifically engineered for the operational realities of rental property management. Its fully adjustable steel construction spans window openings from 22 to 36 inches — covering the vast majority of standard US residential window sizes without any cutting, welding, or custom ordering. The matte black powder-coated finish is professionally neutral and visually consistent across different apartment units, which matters for landlords managing multi-unit buildings where aesthetics affect perceived property value. At $90 per unit, the Model A is one of the lowest-cost per-window security investments available in the US market, and its tool-free adjustability means a single maintenance technician can install, remove, or reposition bars across an entire building in a single workday. Review the full Model A specifications at securitywb.com/model-a/.
Model B Wall-Mount Bars: Maximum Security for Ground-Floor Commercial Units
For landlords managing mixed-use buildings, ground-floor retail spaces, or basement units where permanent installation is appropriate and desired, the SWB Model B Wall-Mount Window Bar delivers the maximum security of heavy-gauge steel with a powder-coated black finish designed for long-term durability in exposed environments. Unlike consumer-grade hardware store options, the Model B is engineered for permanent installation as a landlord infrastructure investment rather than a tenant-supplied amenity. Ground-floor storefronts in cities like Chicago’s South Side, North Philadelphia, or South Los Angeles — where commercial burglary rates are significantly elevated — benefit most from the Model B’s fixed wall-mount construction, which provides structural resistance comparable to professionally welded installations at a fraction of the contractor cost. Explore the full specifications at securitywb.com/model-b/.
How to Deploy Window Security Bars Across a Multi-Unit Rental Building
Scaling window security bar installation across a multi-unit residential building requires planning, prioritization, and a systematic deployment approach. Landlords managing buildings with 10, 20, or 50+ units cannot simply install bars reactively after a break-in — by then, the damage is done and the liability exposure is established. A proactive, phased installation plan protects tenants, reduces liability, and keeps costs manageable within annual maintenance budgets. The first step is a physical security audit of the entire property. This involves identifying all windows at ground level and first-floor level, assessing existing locking mechanisms, reviewing local crime incident data from the local police department or city crime map, and determining which windows are in sleeping areas (requiring egress-compliant bars) versus living rooms, kitchens, and bathrooms (where fixed bars may be permissible). The second step is selecting the appropriate SWB model for each window category. Bedroom windows require the Model A/EXIT for egress compliance. Ground-floor living area windows can use the Model A telescopic system. Fixed commercial or basement windows can use the Model B wall-mount system. The third step is scheduling installation during routine unit turnovers between tenants, which minimizes tenant disruption and allows maintenance staff to install bars without navigating occupied-unit scheduling complications.
Prioritizing High-Risk Windows: Ground Floor, Alleys, and Hidden Entry Points
Not all windows in a rental building carry equal burglary risk. Law enforcement data from the Bureau of Justice Statistics consistently shows that ground-floor windows facing alleys, parking lots, or low-visibility areas are the primary entry points for residential burglaries. Windows adjacent to stairwells, utility areas, or landscaping that provides concealment are secondary high-risk zones. Landlords should prioritize these locations in their bar deployment schedule before addressing upper-floor windows, which carry significantly lower break-in probability. In cities like Houston, where ground-floor apartment burglaries are concentrated in specific ZIP codes, deploying SWB bars on just the ground-floor and alley-facing windows of a building can reduce break-in incidents by an estimated 60 to 75 percent according to physical security deterrence research from the University of North Carolina’s Department of Criminology.
Working with Tenants: Disclosure, Installation Access, and Lease Clauses
When deploying window security bars in occupied rental units, landlords must provide proper notice of entry as required by state law — typically 24 to 48 hours written notice in most states including California, Texas, Florida, and Illinois. Lease addendums should document that window security bars are a landlord-supplied fixture, not a tenant modification, and specify the bar model, installation date, and any tenant responsibilities for the bars during tenancy. In jurisdictions where window guards are legally mandatory — such as New York City under Local Law 57 — lease riders must include the required window guard disclosure forms signed by both parties annually. SWB’s telescopic bar design simplifies the tenant communication process because bars can be professionally installed during regular maintenance visits without requiring structural wall work, minimizing tenant disruption and objections. See the installation guide for step-by-step instructions suitable for maintenance staff training.
Bulk Purchasing and Amazon FBA Delivery for Large-Scale Deployments
One practical advantage SWB offers landlords and property management companies deploying bars across multiple buildings is the availability of bulk quantities through the SecurityWindowBars storefront on Amazon USA. Amazon FBA fulfillment ensures fast, reliable delivery to any address in all 50 states — including rural markets in the Midwest or mountain states where local security hardware supply is limited. A property management company overseeing 200 units across multiple Chicago neighborhoods, for example, can order a building’s entire window security bar deployment in a single Amazon transaction and receive delivery within days without coordinating with local contractors or waiting on custom fabrication orders. This supply chain efficiency is a significant operational advantage over traditional welded bar installation, which typically requires contractor scheduling lead times of two to six weeks in busy markets.
Short-Term Rental and Vacation Property Security: Special Considerations for AirBnB and VRBO Landlords
The explosion of short-term rental properties in the United States — with over 1.3 million active Airbnb listings in the US as of 2024 according to AirDNA — has created a distinct subcategory of landlord security needs that window bars address particularly well. Short-term rental hosts face a unique security challenge: they must secure their properties against unauthorized access and break-ins during vacant periods between guest stays, while also ensuring that guests — who are not long-term tenants and may not be familiar with the property — can safely exit through windows in case of fire. This dual requirement — anti-intrusion security during vacancies and egress compliance during occupancy — makes the SWB Model A/EXIT the ideal solution for AirBnB and VRBO hosts across the US. The quick-release mechanism requires no special knowledge to operate, making it appropriate for guests who have never seen the bars before. The telescopic installation means hosts can remove or adjust bars between property purchases or when switching between short-term and long-term rental use without any contractor involvement or property damage. Additionally, platforms like Airbnb now actively encourage hosts to document their property’s safety features — including window security bars and egress compliance — as part of the listing profile, which has been shown to increase booking confidence among safety-conscious travelers.
Guest Safety Disclosure Requirements for Short-Term Rental Hosts
Multiple states including California, Florida, and New York have begun extending landlord-tenant safety disclosure requirements to short-term rental platforms. California’s Transient Occupancy statutes, for example, require that short-term rental hosts disclose safety hazards — including inadequate window egress — to guests prior to booking. Airbnb’s own Host Standards policy requires that listings comply with all applicable local building codes, including fire egress requirements. For STR hosts, installing non-egress-compliant fixed burglar window bars on bedroom windows is a triple liability: it violates local building codes, violates the STR platform’s terms of service, and creates direct guest injury liability. The SWB Model A/EXIT eliminates all three risk vectors at a cost of $92 per window — a fraction of the legal exposure a single egress-related incident could generate.
Protecting Vacant Properties Between Guest Stays
Between guest check-out and the next guest check-in, short-term rental properties are particularly vulnerable to opportunistic break-ins. Unlike occupied apartments where the presence of tenants deters entry, vacant STR units are empty, sometimes furnished with electronics and appliances of significant value, and their vacancy schedules are often predictable based on public booking calendars. SWB’s telescopic window bars provide full steel-strength deterrence during these vacancy windows without requiring any operational changes to the hosting workflow. Since the bars are always installed and operable from the inside by any person in the room, hosts can leave them in place permanently — providing 24/7 perimeter security whether the property is vacant, occupied by guests, or being cleaned between stays.
Cost Comparison: SWB Window Security Bars vs. Professional Installation for Rental Properties
When landlords budget for window security upgrades, the comparison between SWB’s DIY-installable telescopic bars and traditional professional contractor installation is stark. Understanding this cost differential at the building level — not just the per-window level — is essential for making the financial case to property owners, building management committees, or real estate investment partners. A professional welded window bar installation in the United States averages between $600 and $1,800 per window depending on market, bar design, and contractor rates according to HomeAdvisor’s 2024 Cost Guide. This figure includes materials, labor, permits where required, and the contractor’s markup. For a 20-unit apartment building with an average of three security-priority windows per unit (one bedroom, two ground-floor living area windows), the professional installation cost would range from $36,000 to $108,000 for the entire building. The same 60 windows equipped with SWB Model A and Model A/EXIT bars — purchased through Amazon USA — would cost approximately $5,460 total, including the slight price premium for egress-compliant models on bedroom windows. The cost savings exceed $30,000 to $100,000 depending on contractor rates in the local market, with no reduction in steel-strength security performance. Furthermore, professional welded installations require removal and replacement fees when tenant damage occurs or when bars need reconfiguration — adding additional ongoing costs that telescopic bars eliminate entirely.
Per-Window Cost Analysis: DIY Telescopic vs. Contractor-Installed Fixed Bars
At the per-window level, the math is equally compelling. SWB Model A: $90 per window, 15-20 minute installation, no contractor, no permit in most jurisdictions. SWB Model A/EXIT: $92 per window, same installation time, egress-compliant for sleeping rooms. SWB Model B Wall-Mount: $91 per window for permanent ground-floor applications. Professional welded bars: $600-$1,800 per window including labor and permits. The SWB solution delivers 94 to 95 percent cost savings per window compared to professional installation. Over a 10-year property hold period, the total cost of ownership for SWB bars — including any replacement units needed due to tenant damage or unit reconfiguration — remains a fraction of the amortized cost of a professional installation. For real estate investors evaluating capital improvement budgets, this cost structure makes window security bars one of the highest ROI security investments available for US rental properties.
Amortizing Window Security Bar Costs Over Multiple Tenant Turnover Cycles
Unlike permanent welded bars, SWB telescopic bars can be uninstalled, stored, and reinstalled in a new unit when a building is reconfigured — or when a landlord sells one property and acquires another. This portability gives telescopic bars an asset classification that welded bars do not have: they are a recoverable, reusable capital asset rather than a sunk structural cost. A landlord who purchases SWB bars for a 10-unit building, then sells that building five years later, can remove the bars — which have caused no permanent wall damage — and redeploy them in their next acquisition. This reusability factor further improves the total cost of ownership calculation and makes SWB bars a uniquely practical solution for active real estate investors managing growing portfolios. For questions about volume purchasing or large-property deployments, landlords can reach SWB directly through securitywb.com/contact/.
🏆 Conclusion
Window security bars for landlords rental properties represent one of the most legally important, financially rational, and operationally practical investments a US property owner can make in 2026. With 6.7 million residential burglaries occurring annually in the United States, an expanding body of state and local law imposing affirmative security obligations on landlords, and egress compliance requirements that make improperly installed fixed bars a fire safety liability, the case for proactive, code-compliant window bar deployment has never been stronger. Security Window Bars delivers the complete solution for landlords at every scale: the Model A telescopic bar for adjustable renter-friendly installation, the Model B wall-mount for permanent ground-floor and commercial security, and the patented Model A/EXIT for egress-compliant bedroom window protection that satisfies IBC, NFPA 101, and OSHA standards simultaneously. Whether you manage a single duplex in Houston or a 200-unit apartment complex in Chicago, SWB gives you the steel strength of professionally installed security at a DIY price point that fits any capital improvement budget. Protect your tenants, reduce your liability, and secure your investment today with Security Window Bars.
Security Window Bars · USA
Secure Your Home Today
Ready to protect your rental property across all 50 states? Shop Security Window Bars on Amazon USA for fast FBA delivery: https://www.amazon.com/stores/SecurityWindowBars — or explore all three models at securitywb.com to find the right bar for every window in your building.
Shop on Amazon →Frequently Asked Questions
It depends on your state and municipality. Under the implied warranty of habitability recognized in all 50 US states, landlords must maintain rental properties in safe and habitable condition — and courts in states like California, Illinois, and New York have extended this to include window security in high-crime areas. New York City’s Local Law 57 explicitly requires window guards in apartments housing children under 10. Texas Property Code §92.153 mandates window latches and security. Landlords should consult a local real estate attorney and review applicable municipal codes for their specific jurisdiction to determine precise obligations.
Yes — SWB’s Model A Telescopic Window Bar is specifically designed for no-damage installation in many configurations. The adjustable steel bar tensions against the window frame without requiring drilling or wall anchors in most standard US window sizes (22 to 36 inches wide). This makes it ideal for landlords who need to install security bars without triggering permit requirements or causing structural modifications that would require disclosure during property sales. The bars can also be removed and reinstalled in different units between tenant turnovers without any residual damage to the window frame or wall.
Only if the bars feature an approved quick-release mechanism. The International Building Code (IBC Section 1030) and NFPA 101 Life Safety Code require that sleeping room windows maintain a minimum net clear opening of 20 inches by 24 inches and be operable from the inside without keys, tools, or special knowledge. Fixed welded burglar bars on bedroom windows are not egress compliant and can result in fire entrapment deaths, code violations, and serious landlord liability. SWB’s Model A/EXIT features a patented quick-release mechanism that satisfies IBC, NFPA 101, and OSHA egress standards, making it the code-compliant choice for all bedroom and sleeping area windows in rental properties.
Using SWB’s telescopic bar systems, the cost is dramatically lower than professional contractor installation. SWB Model A bars cost $90 per window, Model A/EXIT bars are $92, and Model B wall-mount bars are $91. A typical 10-unit apartment building with 30 priority windows (three per unit) can be fully equipped for approximately $2,700 to $2,760 in bar costs alone — plus minimal labor time since each bar installs in 15 to 20 minutes. By comparison, professional welded bar installation averages $600 to $1,800 per window according to HomeAdvisor, putting the professional cost for the same 30 windows at $18,000 to $54,000. SWB delivers 90 to 95 percent cost savings with equivalent steel-strength security.
This depends on how the bars are installed and what the lease specifies. Landlord-installed window bars should be documented in the lease as property fixtures — meaning tenants are responsible for their preservation and cannot remove them without landlord permission. SWB’s telescopic bars, while removable, should be designated as landlord property in lease addendums to prevent unauthorized removal. For units where egress-compliant bars are legally required — such as NYC Local Law 57 window guards — landlords must document annual inspection and ensure bars remain installed throughout the tenancy. It is advisable to include window bar preservation and inspection rights clauses in all new and renewed lease agreements.
Absolutely. Short-term rental properties face elevated burglary risk during vacancy periods between guest stays, and STR hosts also carry liability exposure for guest safety during occupancy. SWB’s Model A/EXIT bars address both concerns simultaneously: they provide steel-strength anti-intrusion protection when the property is vacant, while the patented quick-release mechanism allows any guest to open the window for emergency egress without keys or instructions. Multiple states now require STR hosts to comply with residential building codes including fire egress requirements. Airbnb’s own Host Standards also require local code compliance. At $92 per bedroom window, the Model A/EXIT is one of the most cost-effective liability reduction tools available to US short-term rental operators.
When properly selected, professionally installed, and marketed correctly, window security bars can increase both rental appeal and property value — particularly in urban markets where tenant safety is a primary concern. A 2023 Apartment List survey found that security and safety rank among the top three factors influencing renter decisions in US cities. Landlords who market their properties as equipped with professional-grade steel window bars — especially in competitive markets like Atlanta, Denver, or Seattle — often experience lower vacancy rates and stronger tenant retention. In rent-stabilized markets like New York City, documented security improvements may also qualify as Major Capital Improvements (MCI), providing a legal basis for modest rent adjustments.
SWB window security bars are available through the SecurityWindowBars storefront on Amazon USA, where Amazon FBA fulfillment ensures fast delivery to all 50 states — including rural markets where local security hardware suppliers may have limited inventory. Amazon’s platform allows landlords and property management companies to purchase multiple units in a single transaction with tracked shipping to the property address. For large-scale deployments or volume purchasing inquiries beyond standard Amazon ordering, landlords can contact SWB directly through securitywb.com/contact/ to discuss property-scale procurement options. All three models — Model A, Model B, and Model A/EXIT — are available through both the Amazon storefront and the SWB website at securitywb.com.